1.

·         General instrumentation

·         Ability to read drawings – PEFS, PSFS, C&E, FLD, loop diagrams, etc.

·         Sound knowledge of process instrumentation – major process parameters measured, types of sensors/instruments, principles of measurement, etc.

·         Sound knowledge of loop components – IS barriers, surge protectors, FISCO, I/O modules

·         Sound knowledge of communication protocols – HART, Foundation Fieldbus, Modbus, Profibus, DeviceNet, etc

·         Sound knowledge of Fire & Gas devices – different types of detectors, principles of operation, Logic Solvers, Output Devices, etc.

·         Sound knowledge of operation and maintenance of valves – control valves, SDVs, BDVs, solenoid valves, Actuators, positioners, position transmitters, air regulators, different types of manual valves, etc.

·         Skilled in calibration of switches and transmitters (pressure, differential pressure, level, temperature, flow, and absolute pressure)

·         Skilled in maintenance of valves (control valves, ESDVs, MOVs, manual valves), positioners, I/P converters

·         Skilled in use of handheld communication devices (Field Communicator, Interrogator, Fieldmate, NI Fieldbus Communicator, FB Tool, Oscilloscope, etc.)

2.

·         Yokogawa DCS/SIS engineering and maintenance

·         Installation and configuration of Foundation Fieldbus devices using the Engineering Workstation (EWS)

·         Engineering of systems using the SIS EWS

·         Installation and configuration of HART devices

·         Engineering of CentumVP software, including navigation and editing of function blocks

·         Use of Yokogawa AMS to manage field devices

·         Navigation, configuration, and logic modification of ProSafe safety systems using ProSafe-PLC 4-mation & ProSafe-RS Workbench

·         Ability to work on PraSafe SLS – Logic navigation using FLD, sound knowledge of SLS modules

3.

·         Allen Bradley Systems engineering and maintenance

·         Sound knowledge (including engineering and maintenance) of ControlLogix, RSLogix5000, RSLogix500

·         Installation and configuration of field devices

·         Engineering and maintenance of Allen Bradley PLCs using RSLogix5000, RSLogix500, RSFieldbus and FactoryTalk software

·         Installation and configuration of PLCs, I/O modules, and other associated components

·         Programming techniques, program upload/download to PLCs

·         HMI engineering, PanelView, etc.

·         Connection and use of laptop for PLC engineering

4.

·         SMAR Systems engineering and maintenance

·         Installation and configuration of Foundation Fieldbus devices

·         Engineering of System 302 software, including navigation, editing of function blocks

·         Installation and configuration of PLCs, I/O modules and other associated components

·         Programming techniques, program upload/download to PLCs

·         System302 HMI engineering, ProccessView, etc

·         Connection and use of laptop for PLC engineering

5.

·         DeltaV DCS engineering and maintenance

·         Installation and configuration of Foundation Fieldbus devices using EWS

·         Engineering of DeltaV software, including navigation and editing of function blocks

·         Installation and configuration of DCS controllers and I/O modules

·         HMI graphics modification

·

(Added advantage)

·         Knowledge of worksite hazard mgt and permit to work systems

·         Ability to multi task effectively

·         Communication & teamworking.

·         Ability to work under pressure.

·         Good organizational skills

·         Flexibility and adaptability.

·         Self-Motivated and performs under minimal supervision

·         Troubleshooting of safety critical equipment and control/safeguarding system.

·         Supporting the production staff in maintaining facilities.

·         Assist the maintenance team to cope with high number of activities to sustain asset integrity/equipment availability.

·         Comply with HSE practises and procedures.

·         Assist to ensure Technical Integrity and safe operation of new process & utility system to achieve the facility’s objectives.

·         Identify any area of new facilities requiring Change Control and document the change proposal.

·         Provide specification for critical spare/or replacement with vendor details (e.g. Hard disc for compressor control, etc)

·         Review operating/maintenance procedure under current reality and propose changes.

·         Develop (Maintenance Job Routines) MJRs/maintenance procedures and work packs.

·         Identify vendor support requirement for equipment maintenance.

·         Provide technical support in repairing outstanding mal-functioning equipment (e.g. crude transfer pumps etc)

·         Liaison with OEMs for trouble shooting, spare parts, field technical supports etc.

·         Support the maintenance (operation) team in all trouble shooting exercises.

·         Carryout maintenance routine activities in line with company standards, local and international standards.

·         Participate in equipment failure RCA (Root Cause Analysis), investigation and improvement initiatives.

·         Participation in MFI (Management Facility Inspections) and HSE meetings

·         Close out personal MFI actions

·         The job activity period is daily on 12-hour (7am to7pm) routine over a 14-day period.

·         The successful candidate will manage own absences with his/her contractor for suitable qualified covers.

·         The successful candidate is expected to be Port Harcourt based

·         There may be need for periodic visits to Shell industrial area for trainings and official assignments.

·         Personnel may be required to work extended hours as need may arises.